wtw pHotoFlex STD, Руководство пользователя

Страница: 22 / 80

Operation pHotoFlex
®
STD
22
ba75958e07 11/2020
4.3.4 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated
in the status line of the measured value display. When storing measured val-
ues and calibrating, the current date and time are automatically stored as
well.
Numerals are generally entered via the number keys.
The correct setting of the date and time and date format is important for the
following functions and displays:

Current date and time

Calibration date

Identification of stored measured values.
Therefore, check the time at regular intervals.
Setting the date,
time and date
format
The date format can be switched from the display of day, month, year
(
dd.mm.yy ) to the display of month, day, year ( mm/dd/yy or mm.dd.yy ).
After a fall of the supply voltage (empty batteries, empty battery
pack), the date and time are reset to 01.01.2003 00, 00:00 hours.
1 In the measured value display:
Using <MENU> , open the Configuration menu.
The instrument is in the configuration mode.
2 Using <
V
> <
W
>
and <START/ENTER> , select and confirm the
menu System / Continue ... / Date/time .
3 Select and confirm the Time menu with <
V
> <
W
>
and <START/EN-
TER> .
A display for the entry of numerals with the number keys opens up.
Time
:
14:53:40
Date
: 01.02.05
Date format
:
dd.mm.yy
Date/time