Operation
pH 3310
48
ba75802d06
05/2017
Starting the automatic
storage function
To start the automatic storage function, select
Continue
with
<
><
>
and confirm with
<ENTER>
. The meter switches to the measured value
display.
The active automatic data storage function can be recognized by the
progress bar in the status line. The progress bar indicates the remain-
ing storage duration.
Note
If the automatic storage function is activated, only the following keys
are active: Softkeys,
<M>
,
<STO
_
>
and
<On/Off>
. The other keys
and the automatic switch-off function are deactivated.
Energy saving mode
([Eco mode])
If the automatic storing function is active, the meter provides an energy
saving mode ([Eco mode]) to avoid unnecessary energy consumption.
The energy saving mode switches off functions of the meter that are not
required for the automatic storage of measurement data (such as the
display). By pressing any key the energy saving mode is switched off
again.
Terminating the
automatic storage
function prematurely
Proceed as follows to switch off the automatic data storage function
before the adjusted storage duration has expired:
pH
6.949
25.0
°C
0d03h00min
15.03.2014
08:00
Remaining storage duration
Graphical display of the
storage duration
Eco mode
1
Press the
<STO
_
>
key.
The following window appears.
