wtw Oxi 7310, Руководство по эксплуатации

Страница: 33 / 60

Oxi 7310 Settings
ba75931e03 12/2011
33
6.2.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values and calibration records (see section 7 D
ATA STORAGE
, page 35).
6.3 Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
6.3.1 Resetting the measurement settings
The following settings for D.O. measurements are reset to the default settings
with the
Reset
function:
System
/
Interface
/
Output header
Output of a header for
Output
format
:
CSV
System
/
Printer
Settings for the integrated printer
of the Oxi 7310 P.
For details, see section 9
P
RINTER
(
ONLY
O
XI
7310P), page
43
System
/
Clock Date format
Date
Time
Settings of time and date.
For details, see section 4.4.6
E
XAMPLE
2
ON NAVIGATION
: S
ET
-
TING THE DATE AND TIME
, page 20
System
/
Service
information
Hardware version and software
version of the meter are dis-
played.
System
/
Reset -
Resets the system settings to
the default values.
For details, see section 6.3.2
R
ESETTING THE SYSTEM SET
-
TINGS
, page 34
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Setting Default settings
Cal. interval 14 d
Comparison meas. Off
Measured parameter
D.O. concentration
Menu item Possible set-
ting Description