wtw Oxi 3310 IDS, Руководство по эксплуатации

Страница: 8 / 60

Overview Oxi 3310 IDS (Oxi 3315)
8
ba75944e02 10/2014
1.2.1 IDS sensors
IDS sensors
 support the automatic sensor recognition
 show only the settings relevant to the specific sensor in the setting menu
 process signals in the sensor digitally so that precise and interference-free
measurements are enabled even with long cables
 facilitate to assign a sensor to a measured parameter with differently colored
couplings
 have quick-lock couplings with which to fix the sensors to the meter.
Sensor data from
IDS sensors
IDS sensors transmit the following sensor data to the meter:

SENSOR ID
– Sensor name
– Sensor series number

Calibration data
– Calibration date
– Calibration characteristics
– Calibration interval
– Calibration history of the last 10 calibrations
The calibration data are updated in the IDS sensor after each calibration pro-
cedure. A message is displayed while the data are being updated in the sensor.
1.2.2 Automatic sensor recognition
The automatic sensor recognition for IDS sensors allows
 to operate an IDS sensor with different meters without recalibrating
 to assign measurement data to an IDS sensor
– Measurement datasets are always stored and output with the sensor
name and sensor series number.
 to assign calibration data to an IDS sensor
– Calibration data and calibration history are always stored and output with
the sensor name and sensor series number.
 to hide menus automatically that do not concern this sensor
Note
In the measured value display, you can display the sensor name and
series number of the selected sensor with the [Info] softkey. You can
then display all further sensor data stored in the sensor with the [More]
softkey.