Installation
MIQ/JBR
8
ba64106d03
03/2018
3
Installation
3.1
Scope of delivery
MIQ module
Accessory set, including:
– 4 x cable glands (clamping range 4.5-10 mm) with seals and blind plugs
– 4 x ISO blind nuts M4 with suitable cheese-head screws and plain wash-
ers
– 2 x countersunk screws M3x6 to close the module lid
(+ 2 replacement screws)
– 1 x contact base with fixing screws
Operating manual.
3.2
Assembly in the IQ S
ENSOR
N
ET
General assembly
instructions
The IQ S
ENSOR
N
ET
provides a number of options for integrating the MIQ/JBR
mechanically and electrically in the system (stacked mounting, distributed
mounting, etc.). The various types of installation are described in detail in the
I
NSTALLATION
chapter of the system operating manual.
3.3
Electrical connections: General instructions
Cable glands
All electric cables are fed from below via prepared openings in the enclosure of
the MIQ/JBR. Cable glands with different clamping ranges are included with the
MIQ/JBR to provide sealing between the cable and enclosure as well as for
strain relief. Select the matching cable gland for the respective cable diameter:
Small
, clamping range 4.5 to 10 mm. This cable gland is suitable for all
IQ S
ENSOR
N
ET
sensor cables.
sealing ring 20 x 15 x 1 mm
cable gland M16
blind plug
