wtw inoLab 740, Руководство по эксплуатации

Страница: 154 / 274

BOD
154
Start measurement
with routine
10 Swap between the entry fields with [Next] .
11 Only for New dilution water Yes :
Enter the number of the blank value solutions to be
measured in the
Number field with
82
.
12 Only for New dilution water Yes : Swap between the
entry fields with [Next] .
13 Select the incubation period (in days) in the BOD field
with
82
.
14 Confirm the settings with [Start] .
l
If New dilution water No was selected: The Start
measurement Sample window opens. Continue
with step 28.
l For New dilution water Yes: The Start
measurement Dilution water window opens.
Continue with step 22.
15 Check the data on the display.
l If the data is correct: Continue with step 17.
l To change the data: Continue with step 16.
16 Select Yes in the With routine field with
82
.
The New dilution water entry field disappears.
17 Start the measurement with [Start] . The Samples
window opens.