wtw Cond 3310 IDS, Руководство по эксплуатации

Страница: 9 / 58

Cond 3310 IDS Overview
ba77051e04 07/2017
9
1.2.3 Automatic sensor recognition
The automatic sensor recognition for IDS sensors allows
 to operate an IDS sensor with different meters without recalibrating
 to assign measurement data to an IDS sensor
– Measurement datasets are always stored and output with the sensor
name and sensor series number.
 to assign calibration data to an IDS sensor
– Calibration data and calibration history are always stored and output with
the sensor name and sensor series number.
 to hide menus automatically that do not concern this sensor
To be able to use the automatic sensor recognition, a meter that supports the
automatic sensor recognition (e.g. Cond 3310 IDS) and a digital IDS sensor
are required.
In digital IDS sensors, sensor data are stored that clearly identify the sensor.
The sensor data are automatically taken over by the meter.
Further information on the wireless operation of IDS sensors:
 Web resources
 Operating manual of the IDS WLM System.