WTI Sidewinder SW720A, Инструкция по установке и эксплуатации

Страница: 26 / 27

Program Memory Unit is field upgradable using FLASH non-volatile memory
to store programming.
ELECTRICAL
AC Line Voltage 85-265 VAC 50/60 Hz
Power Consumption
<50W with all options operating
Analog Video Output 75 Ohm, 1Vpp, NTSC, EIA-170A
Video Transient Protection Gas discharge tube followed by 40A 2kW transient voltage
suppressor.
Control Data EIA RS-485 signal levels and drive capabilities.
Data Transient Protection Gas discharge tubes followed by 40A 300W transient
voltage suppressors.
Control Data Protocol Cohu, Pelco D, WTI, NTCIP, ONVIF and others.
Power interrupt immunity NEMA TS-2 paragraph 2.1.4.
Power transient immunity NEMA TS-2 paragraph 2.1.6.
Interface connector MS style 18 Pin weatherproof and corrosion resistant type
with gold plated contacts or AMP style 16 pin type with
gold plated contacts.
ENVIRONMENTAL
Ambient Temp. Limit -29° F to +165° F (-34° C to +74° C)
(Conforms to NEMA TS-2 paragraphs 2.1.2, 2.1.3 and
2.1.5.)
Humidity 100% relative humidity
Protection Rating IP-67/NEMA-4X/ASTM-B117 (entire camera)
Air Contaminants Withstands exposure to sand, dust, fungus,
salt atmosphere, per MIL-E-5400T,
paragraph 3.2.24.7, 3.2.24.8, and 3.2.24.9
Vibration NEMA TS-2 paragraphs 2.1.9 and 2.2.3 using a 0.5g
amplitude signal from 5Hz to 30Hz applied in each of 3
mutually perpendicular axes for 30 minutes.
Shock NEMA TS-2 paragraphs 2.1.10 and 2.2.4 using a 10g
amplitude, 10ms duration shock pulse in each of three
mutually perpendicular axes.
Water Spray Immunity IPx6 rating - IEC 60529 section 14.2.6 using a 25 gallon
per minute water stream through a 12.5mm nozzle at nine
feet for three minutes.
Water Immersion Immunity IPx7 - IEC 60529 section
14.2.7 using an immersion depth of 1 meter measured at the
bottom of the camera and a duration of 30 minutes.
Icing Immunity NEMA 250-2003 section 5.6.
Corrosion Immunity NEMA 250-2003 section 5.10 and the procedure specified
in ASTM-B117 Marine.
EMI Radiation Within the limits set by FCC Regulations 47 CFR Part 15
for Class A devices.
MECHANICAL
Dimensions 12.6”L x 10.4”H x 9.25”W (32cm x 29cm x 20cm)
Weight 14.6 lbs. (6.64 kg.)
SW720A WTI ~ Page 26 of 27