WTI NPS-2HD, Руководство пользователя

Страница: 24 / 52

5.3. NPS Command/Menu Conventions
When invoking NPS-2HD commands and selecting items from
configuration menus, note the following:
·
To display the Help Screen, type /H [Enter] .
·
All NPS commands can be invoked at the NPS> command
prompt, or from the General Parameters Menu, Port
Parameters Menus or Network Parameters Menu.
·
NPS commands are not case sensitive. All NPS commands
are invoked by pressing [Enter] .
·
To select an item from an NPS menu, key in the number for
the item and press [Enter] . To exit from a menu, press
[Esc] at any time. Parameters defined up to that point will
be saved.
·
The " ,Y " option can temporarily suppress the "Sure?"
confirmation prompt. The " ,Y " option is entered at the end
of the command line, immediately following the command
or argument. For example, to reset the network port without
displaying the "Sure?" prompt, type /T,Y [Enter] .
5.4. Defining General Parameters
When the "NPS>" prompt appears, type /G [Enter] to display
the General Parameters menu (Figure 5.3). Note that this menu
is not available in User Mode. The General Parameters menu
offers the following options:
1. System Password: (Up to 16 characters, case-sensitive)
When the System Password is defined, the NPS-2HD will
display a prompt before allowing access to command
mode. If the System Password is entered, the NPS will
start-up in System Mode. To define the System Password,
type 1 and press [Enter] . (Default = undefined).
Note: If the System Password is not defined, the
password prompt will not be displayed, and the NPS
will always start-up in System Mode.
2. Site ID: Defines a text string (up to 32 characters) that
denotes the installation site. To define the Site ID, type 2
and press [Enter] . (Default = undefined).
5-4
NPS-2HD Heavy Duty Network Power Switch; User's Guide