Page 6
AFS-16: Automatic Fallback Switch; Quick Start Guide
3.4.2.
Fallback Switching - Web Browser Interface
The Web Browser Interface will not be available until you have enabled Web Access
as described in the User's Guide. After Web Access has been enabled, access the
AFS-16-1 Web Browser Interface as described in Section 3 in this Quick Start Guide
and proceed as follows:
1.
Access the Circuit Control Menu:
Click on the "Circuit Control" link on the
left hand side of the screen to display the Circuit Control menu. The Circuit
Control menu includes a series of dropdown menus that are used to select the
desired switching action for each Circuit Module.
2.
Select the Switching Action:
Use the dropdown menu to select an A/B
switching operation for the desired Circuit Module. For example, to switch
Circuit 1 to the B position, click on the down arrow in the "Action" column
for Circuit 1 to display the dropdown menu, select the "B" option from the
dropdown menu and then click on the "Confirm Circuit Actions" button.
Notes:
• The dropdown menu for each circuit allows you to select position A,
position B or the default position. Normally, the "Default" option will
switch the circuit to the user-defined Default position which can be
selected as described in the User's Guide. However, in the case of this
Quick Start procedure, the Default circuit positions have not yet been
defined.
• The Circuit Control Menu also includes the ability to switch all AFS-16-1
Circuit Modules. If desired, the dropdown menu in the "All Circuits" row
can be used to switch all AFS-16-1 circuits.
3.
Confirm Switching Actions:
After you click on the "Confirm Circuit Actions"
button, the AFS-16-1 will display a screen which summarizes the selected
switching operation(s) and asks for confirmation before executing the command.
To proceed with the selected switching operation, click on the "Execute Circuit
Actions" button.
4. The AFS-16-1 will execute the switching operation and then display the Circuit
Status screen.
5.
Exit Command Mode:
Click on the "LogOut" button on the left hand side of
the screen to exit command mode.
This completes the Quick Start procedure for the AFS-16-1. Prior to placing the
unit into operation, it is recommended to refer to the AFS-16-1 User’s Guide for
important information regarding advanced configuration capabilities and more
detailed operation instructions. If you have further questions, please contact WTI
Customer Support as described in Appendix C in the User's Guide.
