Original Operating Instructions
BATD0050-ES-1-400-1
Operation
O_BATD0050-ES-1-400-1_V2.6_GB
Page
51
of
72
5.3
Enable Switch
Pressing the Enable switch opens the AC and DC circuit breakers.
When all possible errors are eliminated, the Enable switch may be pulled out. The
product restarts operation after the Enable switch has been pulled out and the product
has been reset by means of the higher-level control.
NOTICE: The red-marked area is under voltage when the AC/DC cables are not
disconnected externally (Figure 23). The blue-marked area shows the DC link.
Figure 23: Danger area
Содержание BATD0050-ES-1-400-1
Страница 72: ......
