Original Operating Instructions
BATD0050-ES-1-400-1
Installation
O_BATD0050-ES-1-400-1_V2.6_GB
Page
37
of
72
3.5.1.6 Option Island Grid function
If the product has the island grid function, an external voltage (+24 V
DC
) must be
applied on the terminals (-X17.1-2) so that the product can also operate parallel to the
grid. By disconnecting the external voltage via an external disconnecting device, the
product can establish an island grid.
The terminals (-X17.1-2) are implemented as a potential-free feedback contact. A
signal on this feedback contacts manage the switching in and out of the island grid
mode.
Figure 16: Terminal strip (-X17)
Figure 17: Wiring diagram extract
terminal strip (-X17)
Procedure:
1.
Locate
terminal strip (-X17) (Figure 16).
2.
Connect
power supply (+24 V
DC
) (Figure 17):
DC (+)
to terminal (-X17.1)
DC (-)
to terminal (-X17.2)
Содержание BATD0050-ES-1-400-1
Страница 72: ......
