Original Operating Instructions
BATx0100-ES-1-400-1
User Information
O_BATx0100-ES-1-400-1_V3.1_GB
Page
12
of
73
1.5
Intended Use
This product is intended for use exclusively with batteries.
The product is constructed for indoor use and fulfils the IP20 degree of protection.
The product is not suitable for operation in areas with the risk of explosion and must be
kept away from flammable or combustible materials.
For all work appropriate tools must be used.
Whenever working on the product, the ESD protection measures must be observed.
Only operate the product with the maximum permissible connection values stated in
Section Electrical Data.
The operating conditions given in the technical data
must be fulfilled at all times.
The manufacturer must not be liable for any damages resulting from other persons
conducting work on the product.
Never operate the product with any technical defects.
The type plate, product safety signs and labels must remain permanently attached to
the product.
Only the spare parts that are listed in this document may be used. The use of other
spare parts must be construed as an alteration.
Without approval of the grid operator do not switch off or adjust settings which have
influence on the grid management service.
All changes and/or modifications to the equipment, its structure and its software are
prohibited and will result in loss of warranty.
Intended use includes reading these operating instructions and complying with all
instructions contained herein, in particularly the safety instructions. These operating
instructions must be kept near or in the product for the lifetime of the product.
Should these operating instructions get lost or destroyed, the customer must
immediately contact the manufacturer to order, at the customer's sole expense, new
operating instructions.
Содержание BAT 0100-ES-1-400-1 Series
Страница 73: ......
