Wifi StealthPad Installation Manual
5
Installation Site Power Supply Check
IT IS RECOMMENDED THAT ALL STEALTHPADS BE ON THE SAME POWER PHASE.
Otherwise you need to adjust B sync value step by step to find a best position to sync
different StealthPads when connected to power sources with difference phases.
ENSURE THERE IS SUFFICIENT CURRENT SUPPLY IF MULTIPLE STEALTHPADS
SHARE ONE POWER SOURCE.
The rated current for StealthPad is 0.3A but the
suggested current draw for one StealthPad is 1A for better performance, so a 15A power
box will better serve 10 StealthPads instead of 15 or more.
ENSURE THERE IS GOOD GROUNDING FOR THE STEALTHPAD POWER SUPPLY.
Sometimes poor grounding and high noise from the power supply will lower the sensitivity
or detection range.