With the underside of the
Seat
facing upwards,
attach the
Seat Plate Assembly
to the bottom of
the
Seat
using the
(B)
4 Black .78 inch Bolts
with
(E)
1 Black Washer
per bolt and tightening with
the
(F)
Black Wrench.
Note the seat plate is
marked with an arrow. This arrow should be point-
ing to the front of the chair seat.
With the chair’s Back facing toward you, attach the
Head-
rest
to the top of the chair
Back
using the
(C)
3 Silver .70
inch Bolts
lightly screw in each bolt, before tightening
make sure that the headrest is level to the top of the chair.
Once you have it at you desired position continue
and tightening the 3 bolts with the
(G)
Silver Wrench.
Align
Gas Lift
with
Telescopic Cover
and Insert Firmly into the Center of the
Base
. Insert the 5
Casters
into their
respective base holes.
Take Each
Padded Arm
and attached them to the
chair
Seat
side using the
(D)
8 Black .98 inch
Bolts
, (4 per side per arm) and tightening with the
(F)
Black Wrench.
Make sure that the
Padded Arm
s
are placed on
the proper side of the chair, they’re clearly marked
as user right.
parts assembly
E
C
