Prior to installation, verify that all hardware is
included. If there are missing components,
please contact Wren.
C
OMPONENT
L
IST
Hyperion Horn Speaker
R
EQUIRED
T
OOLS
AND
A
CCESSORIES
#2 Phillips screwdriver
Drill
Cables (18/2 AWG min.)
NOTE: M
OUNTING
HARDWARE
IS
NOT
PROVIDED
. B
E
SURE
TO
USE
APPROPRIATE
FASTENERS
AND
ACHORS
FOR
THE
MOUNTING
SURFACE
.
Hyperion Gateway Installation Guide
www.wrensolutions.com
7L587
Rev 190510
I
DENTIFY
AN
APPROPRIATE
MOUNTING
LOCATION
1
Mounting Surface
The HYP-SPK15-W should be mounted to a structurally
solid wall or ceiling surface.
Mounting Height
The minimum recommended mounting height for this
device is 8’ from ground level.
Mounting
Mount stainless steel mounting bracket at desired
location. Using appropriate hardware (Fasteners and
anchors are not provided).
3
C
ONNECT
G
ATEWAY
NOTE
: More information can be found in the
Gateway User Guide.
The gateway supports two,
independent audio channels, each with
separate connection ports and volume
adjustment.
Attach speaker wires to the Gateway,
making sure to note polarity.
2
C
ONNECT
S
PEAKER
Attach the speaker wires to the
speaker, making sure to note
polarity.
NOTE
: W
E
RECOMMEND
USING
18 AWG
WIRE
OR
LARGER
AND
A
MAXIMUM
RUN
OF
500
FEET
IN
ORDER
TO
MAINTAIN
AUDIO
VOLUME
AND
CLARITY
