Wren 700, Инструкция по сборке

Страница: 7 / 12

WALL UNIT
700 - 800 2 Door
Assembly Guide
For Internal Use: FI.WR.INS.035_WKIN00125_WALL_700 _800_2Door_Rev4.indd Page 6
Step 16.
Measure appropriately and attach
the 2 x hanging bracket plates
onto the wall screwing through
the provided holes into your wall.
Screws for fixing to walls are not
provided as these vary depending on
your wall material and construction.
Ensureappropriatefixingsforwall
construction are used. Hang the
cabinet using the brackets to hook
onto the plate as shown below.
Step 18.
Screw into any side units using the provided 2x 30mm screws (K)
to secure the unit. Screw just to the rear of the hinge plate then
place a cover cap on the head to conceal it.
Step 17a.
Rotate the screw clockwise
to move the cabinet up.
Anti-clockwise for down.
Step 17b.
Adjust the depth
using centre screw.
Step 17c.
Screw the red
screw until it
touches the plate
to lock in position.
K