WALL UNIT
700 - 800 Tall 2 Door
Assembly Guide
For Internal Use: FI.WR.INS.046_WKIN00131_WALL_700-800_2Dr_Tall_Rev3.indd
Page 6
Step 16.
Measure appropriately and attach the 2 x hanging bracket plates onto the
wall screwing through the provided holes into your wall.
Screws for fixing to walls are not provided as these vary depending
on your wall material and construction. Ensure appropriate fixings for
wall construction are used.
Step 17.
Hang the cabinet using
the brackets to hook
onto the plate as shown
Hanging Bracket
Plate
Step 18.
Using points a, b & c adjust the Cabinet to suit.
Step a.
Rotate the screw clockwise
to move the cabinet up.
Anti-clockwise for down.
Step b.
Adjust the depth
using centre
screw.
Step c.
Screw the red screw until it
touches the plate to lock
in position.
Hanging
Bracket
viewed though
Back Panel
b
C
c
a
a
b
K
Step 19.
Screw into any side units using the
provided 2x 30mm screws
(K)
to
secure the unit. Screw just to the
rear of the hinge plate then place a
cover cap on the head to conceal it.
