Wren 1000 2 Drawer, Инструкция по сборке

Страница: 9 / 12

BASE UNIT
1000 2/3 Drawer
Assembly Guide
For Internal Use: FI.WR.INS.027_WKIN00111_BASE_1000_2_3Drawer_Rev4.indd Page 8
Leg position diagram
Step 11.
Push leg firmly down into leg base.
Adjust legs to 155mm before turning carcass
upright. Once in situ level accordingly.
Step 10.
Lightly hit centre peg of leg base with hammer
until flush with the leg base.
B
Front
Front
Ensure legs are rotated as shown so that part
of it is supporting the end panels
(B) .
Front legs should have flat edge to the front.
Step 9.
Secure each of the legs into place with
2 x 15mmscrews
(L) per leg
B
C
Front
L L
C
B
C C
B
B
C
B