Wren Kitchens Vogue WALL UNIT 600 Lift, Инструкция по сборке, Страница: 8 / 12

Page 7
WALL UNIT
600 - 800 Lift Assembly Guide
Care to be taken. Hanging procedure is necessary for a safe installation.
Step 20.
Measure appropriately and
attach the 2 x hanging bracket
plates onto the wall screwing
through the provided holes into
your wall.
Step 21.
Hang the unit using the
brackets to hook onto the
plate as shown
Hanging Bracket
Plate
Step 22.
Using points a, b & c adjust the unit to suit.
Step a.
Rotate the screw clockwise
to move the unit up.
Anti-clockwise for down.
Step b.
Adjust the depth using
centre screw.
Step c.
Screw the red screw until it
touches the plate to lock
in position.
Hanging
Bracket
viewed through
Back Panel
b
C
c
a
a
b
K Step 23.
Screw into any side units using the provided 2x 30mm screws (K) to secure the
unit. Screw just to the rear of the hinge plate then place a cover cap (M) on the
head to conceal it.
Screws for attaching to walls are not provided as these vary depending on materials,
thicknessandconstruction.Ensureappropriatefixingsforwallconstructionareused.