Wren Kitchens SHALLOW BASE UNIT 800 BASE, Инструкция по сборке, Страница: 10 / 12

Page 9
WALL / SHALLOW BASE UNIT
700 - 800 Assembly Guide
Step 25.
Insert hinge in top & bottom
holes as shown below.
Step 26.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 27.
Attach the door to unit
where required.
To attach door, clip hinge
onto hinge plate and click
to secure.
Hinge Cover Caps
Step 29.
Fit cover caps to hinge.
Adjust Soft close to suit.
Step 28.
Adjust hinge to suit. As shown below.
Hinge Plates
The top and bottom
hinges MUST be
adjusted to the
SAME
STRENGTH.
To adjust hinge using
a screw driver, tighten
or loosen as required at
points
1 & 2 .
Point 1 - In - Out
Point 2 - Left - Right
1
2
FRONTAL
HINGE
ADJUSTMENT
View from inside of unit
To release door,
pull catch as shown,
to release hinge from
the hinge plate.
To Move the
hinge up/down,
loosen screws
A + B,
Manoeuvre
the door, then
re-tighten the
screws
A
B