For Internal Use: 50-WKIN00110_MIDWAY_CABINET_Assembly_Rev1.indd
Page 1
MIDWAY
CABINET
Assembly
Guide
30" / 36" / 42" Wall Cabinet
7/8" (22mm)
18 13/16" (476mm)
1 3/16" (30mm)
18 7/16" (468mm)
1 1/2" (38mm)
18 1/8" (460mm)
1 9/16" (40mm)
18 1/16" (458mm)
3 1/8" (80mm)
16 7/16" (418mm)
Worktop Thickness
End Panel Height
Step 1.
See table above and find required end panel height for
the thickness of worktop used.
Measure the height required and carefully cut both end
panels to the correct size.
(Ensure that both of the end panels are cut square
and accurately on the top edge.)
End panel height
End panel height
Step 3.
Refer to the drilling measurements on the following
page and drill holes
5/16" (8mm) x 1/2" (13mm)
deep at
the positions shown in the end panel.
(Ensure that the holes are drilled accurately.)
Step 2.
Measure thickness (mm) of
board of midway cabinet.
11/16"
(18mm)
3/4"
(19mm)
13/16"
(20mm)
It is important to be as accurate
as possible.