Wren Kitchens BASE UNIT 150, Инструкция по сборке, Страница: 7 / 8

BASE UNIT
150 -200 1 Door
Assembly Guide
For Internal Use: FI.WR.INS.019_WKIN00100_BASE_150-200_1Dr_Rev4.indd Page 6
Step 12.
Insert hinge in top & bottom
holes as shown below.
Step 13.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 14.
Attach the door to unit
where required. Adjust
hinges to suit. See below.
To attach door,
clip hinge onto hinge
plate and click to secure.
Hinge Cover Caps
Step 16.
Fit cover caps to hinge.
Adjust Softclose to suit.
Step 15.
Adjust hinge to suit. As shown below.
To adjust hinge using a screw
driver, tighten or loosen as
required at points 1 & 2 .
Point 1 - In - Out
Point 2 - Left - Right
1
2
FRONTAL
HINGE
ADJUSTMENT
Hinge Plates
View from inside of Carcase
To release door,
pull catch as shown,
to release hinge from
the hinge plate.
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.