Wraith ARS 2X, Руководство оператора, Страница: 4 / 11

Page 4 of 11
DEFAULT KEY BINDS
Below are a list of the default keybinds that come with the Wraith ARS 2X . Please note, if you would like to
change a keybind to a different key, open the pause menu, go to settings, then “Key Bindings”, then “FiveM”.
There you will be able to change any of the actions to a different key.
Action Key
Open remote F5
Close remote ESC or right mouse button
Lock front antenna Numpad 8
Lock rear antenna Numpad 5
Lock front plate Numpad 9
Lock rear plate Numpad 6
Toggle keylock L
Although most of the actions listed above are self-explanatory, the keylock action may not be. When the
operator presses the key bind to toggle the keylock, all the radar’s key binds seize to work until the operator
toggles the keylock again. This functionality is like the keylock found in Lt. Caine’s ELS.
STARTING THE SYSTEM
At first glance, the Wraith ARS 2X may seem quite daunting, but the system itself is in fact quite simple. Below
are the steps which the operator should take to get the radar system and the antennas up and running.
1. Press the key to open the remote (default: F5)
2. Click the button at the top labelled “Toggle Display”
3. The radar interface should now be displayed, click the button on the radar labelled “PWR”
4. With the remote still open, click the button labelled “XMIT” for one or both antennas
5. Now that the antennas are in transmit mode, click the “SAME” or “OPP” button for one or both
antennas
Following these steps will result in the radar system becoming operational and the antennas detecting vehicle
speeds.