PZM
IV
& PZMT
IV
World Precision instruments
Unpacking and Set-Up
1.
remove the microscope from the case and check that the following parts are
all present and undamaged:
microscope Head
WFH 0x Wide-Field eyepieces (two)
Paired eyeguards (two)
ring light Adapter
track stand
2.
Assemble the track stand.
3.
mount the microscope head into the focus mount.
4.
remove the protective cap on the bottom of the microscope head.
5.
refer to the parts diagram on page 3, and follow the set-up instructions
below.
6.
install the WFH 0x eyepiece pair
(1)
included. the paired eyeguards can
now be attached to the eyepieces.
7.
the exact working distance is found by adjusting the focusing knob
(7)
.
8.
When the optional stands are used instead of the standard base, see
system diagram on page 4 for mounting instructions.
