WPI PZMIII, Инструкция по эксплуатации

Страница: 14 / 16

10 World Precision Instruments
APPENDIX: BOOM STAND ASSEMBLY
1. Remove all the parts from the box.
2. Unscrew the hex screw from
Vertical Post. The Vertical Post
should have a cross block
attached to it.
3. Screw Vertical Post and Base
together using the hex screw.
(Insert the screw from bottom of
the base into the threaded section
of Vertical Post.)
4. Insert the Horizontal Bar into the
opening in the cross block with the
slot side facing up.
Two different types of focusing assemblies are available:
Focus Mount
1. Remove the focus mount from the protective packaging
2. Insert the focus mount into the end
of the Horizontal Bar and secure it by
tightening set screw.
3. Tighten one or both hex screws (2.5
mm and 4 mm) so the microscope head
is tiltable but not free to swing.
TIP
: The focus mount can be inserted from
the TOP, BOTTOM or END of the Horizontal
Bar. For oblique viewing, set the focus
mount up at various angles and then tighten the handle.