WPI PicoPump PV830, Инструкция по эксплуатации

Страница: 9 / 28

PV830 Pneumatic PicoPump
World Precision Instruments 5
Setup
Firmly insert tubing into the quick-connect fittings on the rear of the instrument. To
remove tubing, press in on the surrounding collar while pulling the tubing out. Plastic
tubing can be disconnected easily, while metal tubing may require more effort. For a
diagram of the setup, see Fig. 6.
Air or
Nitrogen
Supply
150 psi max
Vacuum Pump or Line
Pressure Input Vacuum Input
Hold
Eject
Port
Micropipette Holder
Micropipette
Holder
Glass
Micropipette
Glass
Micropipette
Quick Connect Fitting
Collar 1/4 in. Tubing
To insert, push the tubing in firmly.
To remove, push in on the collar
while pulling the tubing out.
Vacuum
Port
Fig. 6—This diagram show the experimental setup.