WPG MRPT1211LAC, Инструкция по эксплуатации

Страница: 26 / 38

Rev 2.0/4-16 24 MRPT1211LAC: #35063
E) Replacing the Cylinders and Cups
1) Push one push rod (16) all the way down, and then position a new cylinder (7) over the push
rod.
2) Place a retainer plate (5) into a new cup (6) and insert these parts together into the top of
the cylinder (7). Then push both parts down until the retainer plate contacts the push rod
(16).
3) Install two new retainer screws (4) to secure the retainer plate (5) to the push rod (16).
Tighten the screws securely.
4) Press down on the cylinder (7) just installed to hold it in place, and then push the other push
rod (16) all the way down.
5) Repeat steps 1‒5 to install the second cylinder, cup and retainer plate.
F) Replacing O-Rings and Reassembling the Head Assembly
1) Install two new cylinder O-rings (9) into the valve plate (3), and position the valve plate on
the top of the cylinders (7).
2) Install four new head O-rings (8) into the valve plate (3), and position the two heads (2) on
top of the valve plate.
3) Make sure that the valve plate (3) and heads (2) are oriented in their original positions, and
secure the heads to the pump using the eight head screws (1).
Reference
Number Availability Quantity Description
1 * 8 Head Screws (T25 Torx)
2 * 2 Head
3 * 1 Valve Plate
4

4 Retainer Screw (T20 Torx)
5 * 2 Retainer Plate
6

2 Cup
7

2 Cylinder
8

4 Head O-ring
9

2 Cylinder O-ring
10 * 2 Long Valve Screw (T15 Torx)
11 * 2 Valve Limiter
12

2 Leaf Valve (Exhaust)
13 * 2 Short Valve Screw (T15 Torx)
14 * 2 Retainer Plate
15

2 Leaf Valve (Intake)
* Special Order – Non-Stocked Item

Included in service kit #66178