WPG MR1611LDC, Инструкция по эксплуатации

Страница: 15 / 46

Rev 34.7/3-20 13 MR1611LDC: #35050
1
2
5
4
3
Confirming the Pad Frame Configuration
WARNING: Load Capacity of lifter varies, depending on pad frame configuration.
Make sure the pad frame has been assembled in the configuration that will provide optimal
support of the load while lifting (see ASSEMBLY: T
O
C
HANGE THE
P
AD
F
RAME
C
ONFIGURATION
). The
pad frame configuration selected must be appropriate both for the weight and for the dimensions
of the load to be lifted.
Preparing to Use the Optional Remote Control System
If the lifter is equipped with a Remote Control System, the operator can engage the lifter's
“attach” and “release” functions at distances up to 250' [76 m], provided there is a direct and
clear view of the lifter and its status indicators from the operator location (see MAINTENANCE:
R
EMOTE
C
ONTROL
S
YSTEM
T
EST
). When lifting a load from a remote location, the operator must
monitor the lifter at all times to make sure that it is functioning as intended. 5 Additionally, the
operator must exercise special care to make sure that the load is landed and supported correctly
before releasing the load (see T
O
R
ELEASE THE
P
ADS FROM THE
L
OAD
to follow).
The radio transmitter is also equipped with an emergency transmitter disconnect that prevents
the transmitter from sending any transmission. To reset, twist the button clockwise while
allowing it to spring outward to its normal position.
5
The Remote Control System is designed with safeguards to prevent multiple lifters from responding until a clear transmission is
received. Nevertheless, radio controlled lifters should be tested to make sure that each transmitter controls only one lifter. The
buttons located on the lifter function regardless of any radio transmissions in the vicinity.
1 EMERGENCY TRANSMITTER DISCONNECT
2 TRANSMISSION INDICATOR LIGHT
3 “RELEASE” BUTTON
4 TRANSMITTER POWER/ENABLE BUTTON
5 “ATTACH” BUTTON