Woxcon SE-891MV, Руководство пользователя, Страница: 9 / 13

9 / 13
7. Remote Control
Reset: Long press this botton up to 10s to reset to factory
set. Input 1~9: Press these button to select input source.
In/Out: When user need select Output multi-screen, firstly
user need select the remote control Output multi-screen
mode button, then through operate In
→
x
→
Out
→
y to select
output screen.
Please see the above detail description.
Audio: Select output audio signal from HDMI input port.
For example, When user want to select input 1 port audio
to output audio port, press Audio button
→
Input 1 button.
: Press these button to select display
mode.
RES: Cycling select resolution output.
(1024
×
768/1360
×
768/720P/1080I/1080P/4K)
IP: Press this button, the output screen left top
concer will display the unit IP address.
VOL-/VOL+: Adjust audio volume output.
Mute: No volume output.
8. Web GUI User Guide
The switcher can be controlled via Web GUI software through RJ45 port. You should
know current switcher IP address. The static IP address is 192.168.1.100. You can
connect PC Web GUI through dynamic IP adress. If you don
’
t know dynamic IP address,
Long press AUDIO/IP button up to 6s, the output screen left top concer will display
dynamic IP address. Then you should set the IP address to your PC or laptop or mobile
device is within the same IP address segment with the switcher. After above, you can
enter the switcher IP address in the web browser to access Web GUI.