Woxcon SCU41T-TB, Руководство пользователя, Страница: 25 / 30

4x1 Conference Tabletop Box with Soft Codec
23
Command Function
Command Example and
Feedback
#SET_DIS_SEL_param1_par
am2:xxxx
Set the “Display Input Select”
command “xxxx” to be saved. The
command is usually used to select
input source for display device.
param1 = A, H
§ A = ASCII string.
§ H = HEX string.
param2 = 1~7 (baud rate)
1 - 115200 2 - 57600
3 - 38400 4 - 19200
5 - 9600 6 - 4800
7 - 2400
#SET_DIS_SEL_A_1:ABC
DEFG
#SET_DIS_SEL_H_1:11
12 13
@SET_DIS_INPUT_SEL_
ASCII (BAUD)x1 x2
@SET_DIS_INPUT_SEL_
HEX (BAUD)x1
0xY1,0xY2,...
#SET_DIS_INPUT_DELAY
param1
Set the sending interval time
between the “Display On” and
“Display Input Select” commands in
auto display control mode.
param1 = 1~100 (default: 10s)
#SET_DIS_INPUT_DELAY
10
@DISPLAY_INPUT_DELA
Y 10 SECONDS
#GET_DIS_INPUT_DELAY
Get the sending interval time
between the “Display On” and
“Display Input Select” commands in
auto display control mode.
@DISPLAY_INPUT_DELA
Y 10 SECONDS
#AUTO_CEC_PANEL_TIME
param1
Set the No Signal Timeout. The
display device will be automatically
shut down when no source signal is
detected within the setup time.
param1 = 0~10000 (default:
10mins)
param1 = 0. The system will not
enter standby mode.
#AUTO_CEC_PANEL_TIM
E 5
@DELAY TIME TO %d
MINUTES,TO TURN OFF
THE DISPLAY IF NO
SOURCE DETECTED
#GET_AUTO_CEC_PANEL_T
IME
Get the No Signal Timeout. The
display device will be automatically
shut down when no source signal is
detected within the setup time. @DELAY TIME TO %d
MINUTES,TO TURN OFF
THE DISPLAY IF NO
SOURCE DETECTED
#SET_NO_ACT_TIME
param1
Set the No Activity Timeout. The
display device will be automatically
shut down when no any activity is
detected within the setup time.
param1 = 0~10000
(default:180mins)
param1 = 0. The system will not
enter standby mode.
#SET_NO_ACT_TIME 200
@DELAY TIME TO %d
MINUTES, TO TURN OFF
DISPLAY WHEN NO
ACTIVITY