3x1 Conference Tabletop Box with Soft Codec
3
3. Panel Description
①
INPUT SELECTION:
l
Press the button repeatedly to cycle through the video inputs, and the
corresponding input LED HDMI 1, USB-C or HDMI 2 will illuminate green.
l
Hold and press the button at least three seconds to enter/exit auto switching
mode.
②
DISPLAY CONTROL:
Display ON/OFF composite button. Press the button to
simultaneously send CEC and RS232 commands to turn on/off display device. The
corresponding LED ON/OFF will illuminate green. Note that the ON and OFF
RS232 commands should be set by users.
③
HDMI IN 1:
Connects to HDMI source device (e.g. laptop.).
④
USB-C IN:
Connects to USB-C source device (e.g. MacBook), and then its LED
will illuminate green.
⑤
HDMI IN 2:
Connects to HDMI source device (e.g. laptop).
⑥
HDMI OUT:
Connects to HDMI display device.
⑦
RS232:
Connects to control device (e.g. PC) to control the unit, or connects to the
display device which needs to be controlled by RS232 commands.
⑧
FIRMWARE:
Micro USB port for firmware upgrade.
⑨
ETHERNET:
Two RJ45 ports for network signal extension. One port connects to
network, the other will gain the network signal.
OFF
ON
INPUT
HDMI 1
HDMI 2
USB-C
HDMI IN 1
USB-C IN
ETHERNET
DEVICE
CHARGING
HDMI OUT
HDMI IN 2
RS232
Tx Rx
FIRMWARE
DC 24V
TCP/IP
CONTROL
DEVICE
1
4
3
2
5
7
8
6
9
10
10
11
11
12
13
9
14
