18G HDMI 2x4 Splitter Kit over CAT5e/6/7
7
3.2 Splitter Rear Panel
1. HDMI INPUT:
Connects to HDMI source device.
2. OUTPUTS:
l
HDMI: Type-A female HDMI port to connect local HDMI display device.
l
CATx 1~4: RJ45 port to connect the CATx IN port of receiver by CATx cable. It
supports 12V PoC to power the receiver. The orange LED illuminates when
there is a valid HDMI signal input. The green LED illuminates when power is
applied.
3. IR IN:
3.5mm mini jack to connect IR receiver for IR pass-through. IR ALL IN can be
connected to IR LOOP OUT of previous splitter.
4. CONTROL:
l
IR OUT: 3.5mm mini jack to connect IR emitter for IR pass-through.
l
IR LOOP OUT: Connects to IR ALL IN port of next splitter.
l
RS232: Connects to control device (e.g. PC) to control the splitter or far-end
third-party devices by RS232.
5. AUDIO OUT:
l
Toslink audio output for audio de-embedding from HDMI output.
l
L/R audio output for audio de-embedding from HDMI output.
6. DC 12V:
DC connector for the power adapter connection.
