Transmitter Panel Description
1.
CATx OUT:
RJ45 port to connect the CATx IN port of receiver by CATx cable. It supports
12V PoC to power the receiver. The orange LED illuminates when there is a valid HDMI
signal input. The green LED illuminates when power is applied.
2.
IR IN:
3.5mm mini jack to connect IR receiver for IR pass-through.
3.
IR OUT:
3.5mm mini jack to connect IR emitter for IR pass-through.
4.
DISPLAY:
Type-A female HDMI port to connect HDMI display device.
5.
SOURCE:
Type-A female HDMI port to connect HDMI source device.
6.
DC 12V:
DC connector for the power adapter connection.
7.
EDID Management:
§
EDID BYPASS: Press the button with paper clip or other sharp tool to learn the EDID
from the remote display connected to the Receiver’s HDMI out.
§
EDID COPY Tx/3s: Press and hold the button for 3 seconds to copy the EDID from
the local display connected to the Transmitter’s HDMI out.
§
DEFAULT: The source device learns EDID from the TV which has the lowest
resolution. Press and hold the button while powering off, and then release it after 6
seconds of power on to restore the default.
EDID BYPASS
EDID COPY Tx/3s
IR OUT
IR IN
CATx OUT
DISPLAY
SOURCE
DC 12V
1
2
3
4
5
6
7
