3
BATTERY INFORMATION
Installing or changing batteries in
Miposaur™:
1. To change the batteries, carefully lay
Miposaur™ on its side. Miposaur™
requires 4 x “AA” size alkaline batteries
(not included).
2. Using a Phillips screwdriver (not included)
remove the screws on the battery
compartment cover located on the bottom of
the robot.
3. Insert the batteries according to the diagram.
Ensure that the positive and negative
polarities match the illustrations inside the
battery compartment.
4. Replace the battery compartment cover
and tighten screws using the screwdriver.
Do not over-tighten.
Installing or changing batteries in the
Trackball:
1. Lay the Trackball so that the battery
compartment faces upwards. The Trackball
requires 4 x “AAA” size alkaline batteries
(not included).
2. Using a Phillips screwdriver (not included)
remove the screws on the battery
compartment cover located on the back of
the ball.
3. Insert the batteries according to the diagram.
Ensure that the positive and negative
polarities match the illustrations inside the
battery compartment.
4. Replace the battery compartment cover
and tighten screws using the screwdriver.
Do not over-tighten.
Trackball Battery Diagram/Installation
4 x “AAA” Size
Alkaline Batteries
Miposaur™ Battery Diagram/Installation
4 x “AA” Size
Alkaline Batteries
