16
Getting started
Hand microphone
Squelch level adjustment hot key (see hot key
shortcut 9)
RX indicator light (Green)
Handset keypad lock key (device key)
Transmission key (PTT)
Up key
Function key/ Enter key
Master frequency set up key (see hot key operation 1)
Frequency or channel selection hot key (See hotkey
operation 2)
Save channel hot key (See hot key operation 4)
Output power key
Frequency shift direction hot key (See hot key operation7)
TDR single and dual display switch key (See hot key
operation 8)
Control panel connection socket
Receiver speaker
TX indicator light•Red•
Microphone (MIC)
Down key
Exit/ Cancel key
Scanning key (See scanner functions)
CTCSS / DCS encoding and decoding set up,
CTCSS / DCS scanning (See hot key operation 3)
Encrypted communications set up hot key. (See
hot key operation 10)
VFO/MR switch key (see hot key operation 6)
Keyboard lock key (See keyboard lock)
MIC
#
LOCK
SQL
TDR
SET-D
BAND
HZ
H/L
SCRAM
SCAN
QT/DT
LOCK
UNLOCK
Volume controller
17
Do you want to hurry up and use your transceiver? After reading these chapters and sections you will know how to broadcast
your voice out into the sky. Following is a quick instruction manual. If you encounter any problems or need further explanation,
please read the detailed explanation later in this manual.
1.Installing the transceiver. (See pre-usage installation)
2.Installing the antenna. (See pre-usage installation)
3.Connecting the power source, or vehicle power source. (See pre-usage installation)
4.Press to turn on the transceiver•the transceiver will make a long douple beeping tone, the transceivers brand and model
will be displayed and the transceiver will enter standby status.
Your first QSO
First QSO
WOUXUN KG920P-E
438.98750
145.93750
Press the key shown by the arrow
Display brand and model
Enter standby status
