–– Function Menu Options & Descriptions 33–48
–– Function Menu Options & Descriptions 01–16
–– Function Menu Options & Descriptions 49–50
–– Technical & Safety Considerations
•
Avoid operating the radio (never transmit) while your radio is in the
charger, as this can damage the radio, battery or charger.
•
Remove battery from the radio if storing for more than 1 month.
•
Store the battery at about 60% charge for the longest shelf life.
•
Don't submerge or intentionally soak radio with any liquid (or gel).
•
If accidentally submerged, turn radio o
ff
, dry outside with paper
towel, remove battery, shake any water out, dry again, set aside
for several days (with good airflow) before attempting to turn on.
Visit
for more information
or support, to download a printable PDF version of this manual
or the original pre-programmed GMRS SHTF Channel Chart, to
download the free
WOUXUN
Customer Programming Software
and USB Programming Cable software drivers, to purchase a
host of useful accessories such as a high-gain GMRS-tuned
Smiley Antenna
to extend your talk range, or to post a gear
review & provide constructive feedback, which is encouraged.
When the SHTF, BetterSafeRadio than Sorry!
™
–– Function Menu Options & Descriptions 17–32
01
STEP
Tuning Step
2
.
5
K |
5
K |
6
.
25
K |
8
.
33
K |
10
K |
12.5
K |
25
K |
50
K |
100
K
Tuning step for FREQ-VFO Display Mode in kHz.
02
TXPOW
Transmit Power
LOW
|
HIGH
(0.5 Watts | 4+ Watts)
RF output power level for TX (transmit).
03
SAVE
Battery Saver
ON
|
OFF
Receiver duty-cycling to save battery life.
04
VOX
Voice-Operated Transmit
OFF
|
1
~
9
(1 is highest sensitivity)
Sensitivity for automatic TX based on microphone voice level.
05
W–N
Modulation Bandwidth
WIDE
|
NARROW
(16 kHz | 11 kHz)
RX/TX modulation bandwidth for 25k / 12.5k channels.
06
ABR
Auto Backlight Timer
OFF
|
1
S~
30
S (in seconds)
Duration LCD backlight remains on after any activity.
07
BEEP
Key Beep
ON
|
OFF
Audible keypad & function key confirmation tone.
08
TOT
Time-Out Timer
OFF
|
15
S~
900
S (in seconds)
Timer for automatic TX shuto
ff
.
09
RX–DCS
Digital-Coded Squelch
OFF
|
D023N/I
~
D754N/I
(Press
PF2
to toggle DCS polarity)
RX (receive) DCS “DPL” decoding for speaker muting.
10
RX–CTC
Cont. Tone-Coded Squelch
OFF
|
67
.
0
Hz~
251
.
4
Hz (or non-standard values via keypad)
RX CTCSS “PL/Quiet Tone” decoding for speaker muting.
11
TX–DCS
Digital-Coded Squelch
OFF
|
D023N/I
~
D754N/I
(Press
PF2
to toggle DCS polarity)
TX DCS “DPL” encoding during TX.
12
TX–CTC
Cont. Tone-Coded Squelch
OFF
|
67
.
0
Hz~
251
.
4
Hz (or non-standard values via keypad)
TX CTCSS “PL/Quiet Tone” encoding during transmit.
13
VOX–DLY
VOX Transmit Delay
OFF
|
1
S~
5
S (in seconds)
Duration TX continues after microphone voice stops.
14
SQL
Squelch
0
~
9
(0 = OFF/OPEN)
Signal strength threshold for squelch speaker muting.
15
ROGER
Roger Beep
OFF
|
BOT
|
EOT
|
BOTH
(B = Beginning, E = End Of TX)
Courtesy “OVER” tones during TX.
16
TOA
Time-Out Timer Alarm
OFF
|
1
S~
10
S (in seconds)
Alarm warning tone time before TOT expires.
17
VOICE
Voice Announce/Prompt
OFF
|
CHINESE
|
ENGLISH
Language for voice announcements/prompts.
18
BCL
Busy Channel Lockout
OFF
|
ON
TX inhibit when active signal detected.
19
SC–REV
Scan Review
CO
|
TO
|
SE
(Carrier | Timer | Signal)
Signal review behavior while scanning.
20
SP–MUTE
Speaker Muting
QT
|
QT
✱
DT
|
QT
+
DT
(Quiet Tone | QT or ANI | QT & ANI)
Require Quiet Tone and/or ANI–ID to unmute speaker.
21
DTMF–ST
Touch-Tones & Side-Tones
OFF
|
DT–ST
|
ANI–ST | DT
+
ANI
(DTMF | ANI-ID | Both)
Enable hearing DTMF keypad and/or ANI–ID tones during TX.
22
PTT–ID
Transmit Unit ID #
OFF
|
BOT
|
EOT
|
BOTH
(B = Beginning, E = End)
Send your ANI-ID (Unit #) during TX with PTT (Push-To-Talk).
23
ID–EDIT
Unit Identification
0
~
9
(ANI-ID up to 6 digits, usually 3-digit min. of 101 used)
Automatic Number Identification (Unit #) for Selective Calling.
24
ID–DLY
Identification TX Delay
100
MS~
3000
MS (in milliseconds)
Delay before PTT-ID (ANI-ID) is sent after TX starts.
25
RING
Incoming Select Call Ringer
OFF
|
1
S~
10
S (in seconds)
Duration of audible ringing before voice, when RX ANI-ID.
26
CH–NAME
Channel Alpha-6 Name
0
~
9
,
A
~
Z
,
_
=
+
✱
—
(up to 6 char.,
PF2
=left,
PF3
-right)
Memory Chanel Name (numbers, letters, symbols & spaces).
27
MEM–CH
Save Memory Channel
001
~
400
(3 digits with leading zeros, “N” indicates unused)
Write current settings to used or unused memory channel.
28
DEL–CH
Delete Memory Channel
001
~
400
(3 digits with leading zeros, “N” indicates unused)
Erase selected used or unused memory channel.
29
PRI-CH
Priority Channel
001
~
400
(3 digits with leading zeros, “N” indicates unused)
Select used or unused memory channel as Priority Channel.
30
PRI–SCN
Priority Channel Scan
ON
|
OFF
Enable Priority Scanning (of Priority Channel).
31
S–TONE
Single-Tone TX “Tone-Burst”
1000H
|
1450H
|
1750H
|
12100H
(in Hz)
Frequency of Single-Tone TX (for repeater access, rare).
32
SC–QT
Save Coded Quiet Tone
R–CT
|
T–CT
|
RT–CT
(RX–CTC | TX–CTC | Both)
Location to save found CTCSS tone after SCN–CD search.
33
PONMSG
Power-On Message
MSG
|
DCV
Custom Message or Battery DC Volts during radio power-up.
34
SCN–ADD
Scan Add
ADD
|
DEL
Enable or Disable scanning of current channel.
35
SCN–CD
Scan CTCSS/DCS
67
.
0
Hz~
251
.
4
Hz (Press
PF2
to toggle between tones/codes)
Automatic or manual scan for CTCSS/DCS on active signals.
36
AU–LOCK
Auto-Lock
OFF
|
10
S,
20
S,
30
S,
40
S,
50
S,
60
S (in seconds)
Timer before enabling LOCK mode after last activity.
37
LOCK–M
Lock Mode
KEY
|
KEY
+
PTT
Keypad (and PF side-keys) or same plus PTT (for RX-only).
38
CALL–ID
Select Call ID
1
~
20
Select Calling ID (Group) to TX (if CALL enabled on a PF key).
39
SECOND
Stopwatch
ON
|
OFF
Enable Stopwatch feature on
#
key.
40
PF1S
Prog. Function Key 1 Short
OFF
|
SCAN
|
B–LIGH
|
VOX
|
TXPOW
|
CALL
TALK-A
|
LAMP
|
SECOND
|
CH–MDF
|
DC–VLT
41
PF1L
Prog. Function Key 1 Long
(same)
42
PF2S
Prog. Function Key 2 Short
(same)
43
PF3S
Prog. Function Key 3 Short
(same)
44
PF3L
Prog. Function Key 3 Long
(same)
45
TOP
Top “Red” Prog. Func. Key
OFF
|
LAMP
|
B–LIGH
46
RPT–RCT
Repeater Receipt
ON
|
OFF
(OFF = Mute squelch tail)
Disable speaker muting of squelch/repeater tail.
47
DC–VLT
Battery DC Volts
SHOW
|
HIDE
Press MENU to show (for 10 sec.) or hide battery voltage.
48
QT–SW
Quiet Tone Scan Switch
ON
|
OFF
(ON uses CTC/DCS stored in each channel)
Enable CTCSS/DCS speaker muting while scanning.
49
CH–MDF
Channel/FREQ Display Mode
NAME
|
FREQ
|
CHFREQ
|
CH
(FREQ = VFO Mode)
See
LCD Display Data & Icons
section.
50
RESET
VFO
|
ALL
(Menu Functions | Menu & Memories
–
BEWARE!
)
ALL
restores radio to 30-channel GMRS configuration.
SCAN :
B–LIGH :
VOX :
TXPOW :
CALL :
TALK–A :
LAMP :
SECOND :
CH-MDF :
DC–VLT :
Scan Mode ON | OFF
LCD Backlight WAKE
VOX Operation ON | OFF
TX Power Level TOGGLE
Select Calling TX
Talk–Around Mode ON | OFF
Flashlight ON | OFF
Stopwatch ON | OFF
Display Modes CYCLE
Battery Voltage Level
