110
Advanced Operation
Changing the CTCSS tone remotely
The KG-1000G Plus will allow the RX CTCSS tone of both areas to be changed
remotely. The tone change is only temporary. After the radio is rebooted the tone will
return to the original setting.
To change the RX CTCSS tone remotely, first refer to the Activating the Remote Con-
trol sub-section (page 106) to activate remote control mode.
With remote control mode successfully activated, hold the controlling radio’s PTT,
press 0 + 5 + (four digit CTCSS tone) and then release the PTT. For three digit tones,
add a leading 0. For example, to change to tone 67.0, enter: 0 5 0670.
A beep should be heard on the controlling radio confirming that the command was
received. If no beep was heard, the command failed.
After changing the setting, you will need to exit remote control mode on the controlled
radio. Hold the controlling radio’s PTT, press 9+9 and then release the PTT. The
controlling radio will beep and show the DTMF ID of the controlled radio, confirming
remote control mode has been successfully exited.
