woundwo AROS 100, Инструкция по эксплуатации

Страница: 3 / 12

3
ROLLER SHUTTER
06/2019 © WO UND WO
These instructions for use are valid for the following WO UND WO roller shutters:
NOVOSTYLE;
VOKA 120, VOKA 220, VOKA R100, VOKA P120, VOKA P220, VOKA P290;
AROS 100;
WIRL
WO UND WO roller shutters are primarily designed to provide protection against the sun and heat. WO UND WO roller shutters also guarantee an
increased level of noise protection, privacy, security and façade protection. Any other use or use that extends beyond this shall be deemed
improper. The manufacturer assumes no liability for any resultant damages.
No changes, additions or conversions may be made to WO UND WO roller shutters without the manufacturer‘s consent. If the roller shutters
suffer additional loading as a result of suspended objects, this can lead to the roller shutters becoming damaged. Such actions are therefore
impermissible. Roller shutters in an imperfect condition must be replaced by a specialist dealer immediately.
Only the spare parts approved by WO UND WO may be used to replace worn or defective parts. In the case of parts sourced from third
parties, there is no guarantee that these have been designed and manufactured in line with safety and loading requirements.
Assembly and maintenance work may only be performed by qualified staff.
WO&WO Sonnenlichtdesign GmbH & Co KG assumes no liability for damages caused by improper use.
TECHNICAL DATA
Technical details of the roller shutters can be found in the current specialist dealer catalogue available from your specialist dealer.
PARAMETER VALUE
Mains voltage 230 V AC
Current consumption 0.35 – 0.75 A (depending on the drive)
Power consumption 75 – 160 W (depending on the drive)
Protection class – electric drive IP 44
Permanent operation – motor Approx. 4 minutes
DATA FOR THE ELECTRIC DRIVE
All WO UND WO roller shutters are designed and manufactured in line with the provisions set forth in the EN 13659 standard. Nonetheless,
dangers can arise for the people involved and animals and/or the product can be impaired or other property damaged.
The product may only be operated as intended, in a technically perfect condition, in a safety- and risk-conscious manner and in
accordance with these instructions for use.
Faults that could compromise safety are to be rectified immediately.
The electric motor is not designed for permanent operation. After approx. 4 minutes of operation, the thermal protection starts and the
motor switches off independently. The motor is ready for operation again after 15 – 30 minutes. However, the new actuation time is
considerably reduced, lasting 1 – 2 minutes (depending on the season and the associated ambient temperature).
6. PRODUCT INFORMATION
5. INTENDED USE
4. SAFETY
3. VALIDITY