Worx WX665L, Руководство пользователя

Страница: 9 / 28

9
High Frequency Oscillating Tool EN
SYMBOLS
WARNING–To reduce the risk of
injury, user must read instruction
manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Before working with your tool make
sure that no power cords will be
damaged.
Avoid danger of injury from the
sharp edges of the accessories.
Accessories can become very hot
while working, presenting danger
of burns!
Make sure the tool is unplugged
prior to changing accessories.
Wear protective gloves
High oscillation frequency
Low oscillation frequency
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
Action Figure
Mounting Accessories
--Loosen the flange See Fig. A1
--Insert accessories See Fig. A2
--Tighten the flange See Fig. A3, B
Mounting/Changing the
Sanding Sheet
See Fig. C
Mounting The Suction
Device
See Fig. D
Operating The On/Off
Switch
See Fig. E
Using the Variable
Speed Dial
See Fig. F
Sawing with End Cut
Blade
See Fig. G
The Variable Speed Dial can be used to set the
optimum oscillating frequency according to the
accessories used and the respective application.
Oscillation
frequency
Application
High oscillation
frequency:
Sanding, sawing,
rasping and polishing
stone and metal.
Low oscillation
frequency: Scraping, polishing
varnishes.