Belt sander
WX661 WX661.1
WorKinG HinTS for yoUr
BelT Sander
if your power tool becomes too hot, especially
when used at low speed, set the speed to
maximum and run with no load for 2-3
minutes to cool the motor. Avoid prolonged
usage at very low speed. Always use a
sanding belt suited to the material you wish
to sand. Always ensure the work-piece is
firmly held or clamped to prevent movement.
Support large panels close to the sanding
area. Any movement of the material may
affect the quality of the sanding finish. Start
your sander before sanding and turn off only
after stopping sanding. For best results sand
wood in the direction of the grain. Do not start
sanding without the sanding belt fitted. empty
the dust bag every 5 minutes or sooner to
ensure efficient dust collection.
MainTainanCe
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. never
use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep
all working controls free of dust. occasionally
you may see sparks through the ventilation
slots. This is normal and will not damage your
power tool.
if the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.