Worx WX253, Инструкция по безопасности и эксплуатации

Страница: 5 / 20

5 4
2. Battery leakage may occur under extreme usage or temperature conditions. If battery fluid comes into
contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes into
contact with the eyes, flush with water for several minutes and contact a doctor immediately.
3. Never burn batteries, they can explode in a fire.
4. Do not charge a leaking battery.
5. Use of an attachment and charger not recommended or sold by the screwdriver manufacturer may result
in a risk of fire, electric shock, or injury to persons.
6. Before screwing into a wall, check with a metal-/voltage detector that if you are not sure whether or not
breaking into an electricity, gas or water supply lines.
7. Before you lay down the Screwdriver, make sure that all moving parts have come to a stop.
8. Avoid frequent stalling when screwing or drilling, as this could damage the batteries.
9. Only connect the charging device to an AC supply.
10. Charge Screwdriver battery only with the appropriate charging device.
11. The charging device and the Screwdriver must be protected from moisture!
12. Do not use the charging device outdoors.
13. Do not store or use the tool and battery pack in locations where the temperature may reach or exceed
39ºC. (Such as outside sheds or metal building in summer).
14. Always charge the battery pack between temperatures 2ºC to 30ºC. Ideal charging temperature is 18ºC to
29ºC.
15. Do not short out the contacts of battery or charger.
16. Respect the polarity “+/-“ when charging.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR CHARGER
1. Before using the tool, read the instruction book carefully.
2. Charger is for indoor use only. Do not expose to rain or water.
3. Do not charge non-rechargeable batteries.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.