Worx WX252.1, Инструкция по безопасности и эксплуатации, Страница: 9 / 16

9
EN
metal objects, that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help.
Liquid ejected from
the battery may cause irritation or burns.
6. SERVICE
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
SCREW DRIVER AND IMPACT WRENCH SAFETY WARNING
1. Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring.
Fasteners
contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
SAFETY WARNINGS FOR BATTERY CELLS INSIDE THE TOOL
a) Do not dismantle, open or shred cells.
b) Do not short-circuit charging terminal. Do not store power tool
haphazardly in a box or drawer where charging terminal may short-
circuit each other or be short-circuited by conductive materials.
When
power tool is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one charging terminal to another.
c) Do not expose power tool to heat or fire. Avoid storage in direct
sunlight.
d) Do not subject power tool to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into
contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell has been swallowed.
g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean dry cloth if they become
dirty.
i) Power tool needs to be charged before use. Always refer to this
instruction and use the correct charging procedure.
j) Do not maintain power tool on charge when not in use.
k) After extended periods of storage, it may be necessary to charge
and discharge the power tool several times to obtain maximum
performance.
l) Battery gives its best performance when it is operated at normal room
temperature (20°C ± 5°C).
m) When disposing of cells, keep cells of different electrochemical