Worx WX200, Руководство пользователя

Страница: 11 / 20

drywall screwdriver EN
11
TROUBLESHOOTING
1. If your power tool does not start, check the
plug on the power supply first.
2. If the screw head is damage frequently,
check the screwdriver bit for sharpness,
replace screwdriver bit if worn.
3. If the tool trips when you tighten the screw,
add suitable power to push forward until it
is against the workpiece.
4. If a fault can not be rectified, return the tool
to an authorized dealer for repair.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice.
PLUG REPLACEMENT(UK &
IRELANd ONLY)
If you need to replace the fitted plug then
followthe instructions below.
imPOrTANT
The wires in the mains lead are colored in
accordance with the following code:
blue – neutral
brown – live
As the colors of the wires in the mains lead
of thisappliance may not correspond with the
coloured markings identifying the terminals
in your plug,proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected
to the terminal which is marked with L.
wArNiNG:
Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NOTE:
If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362