Worx WX095, Инструкция по безопасности и эксплуатации

Страница: 8 / 12

8
20V Jobsite Fan WX095 WX095.9
COMPONENT LIST
1. POSITION ADJUSTMENT
2. HANDLE
3. BATTERY PACK PORT
4. HOOK
5. CHARGING INDICATOR LIGHT
6. SPEED ADJUSTMENT BUTTON
7. SPEED INDICATOR LIGHT
8. POWER SWITCH
9. AC ADAPTOR PORT
10. BATTERY PACK
11. AC ADAPTOR
TECHNICAL DATA
WX095 WX095.9
Rated voltage 20V
battery type Li-Ion
AC adapter input
100-240V~50/60Hz
1.0A
AC adapter output 20V 1500mA
Charging
time
(approx.)
Charger for 2.0
Ah battery
1hr
AC Adapter for
2.0Ah battery
5hr
Running
time
low speed (with
2.0Ah battery)
5.7hr
high speed (with
2.0Ah battery)
1.7hr
The ambient operating
temperature
0 o C-45 o C
Battery capacity 2.0Ah /
Machine weight 3.98kg 2.48kg
ACCESSORIES
WX095 WX095.9
Battery pack WA3551.1 1 /
Charger WA3760 1 /
AC adaptor
ZD36W220150
1 1
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the charger. Refer to the accessory packaging
for further details. Store personnel can assist you
and offer advice.
OPERATION INSTRUCTION
WARNING
Do not let your acquaintance with the tool
allow you to get injured. Read all safety instructions
prior to operation.
WARNING
Never make use of attachments or
accessories which are not recommended by
manufacture.
INSTALLING AND REMOVING THE BATTERY
PACK (SEE FIGURE A1,A2)
1. Ensure that the switch (8) is in the off position.
2. Installing and removing the battery pack as the
picture has shown.
WARNING
Remember to remove battery pack or adaptor
each-time when adjusting, cleaning or leaving tool
unused.
INSTALLING AND REMOVING THE AC
ADAPTOR (SEE FIGURE B)
1. Ensure that the switch (8) is in the off position.
2. Insert the round hole end of the adaptor into the
fan as the figure shows
3. Link the plug end of the adaptor to the power
supply.
4. Confirm the adaptor is firmly in place and on
level ground prior to using.
CHARGING THE BATTERY PACK (SEE FIGURE
C AND FIGURE D)
1. Charging the battery pack -through the charger.
Figure C
2. or install the battery pack into the fan and
connecting the AC Adaptor to the fan. Charging
indicator light will be flashing green which means
that the battery is being charged. When the battery
is fully charged , the light will stay green without
flashing
3. If the fan is off, the battery will be fully charged
in 1.5hr using the AC Adapter. If the fan is running
on low speed, it will take approximately 2.0 hours
to fully charge. If the fan is running on high speed,
it will take approximately 4.0hrs to fully charge the
connected battery.