Worx WU701, Руководство по эксплуатации

Страница: 8 / 24

Angle Grinder ENG
SAFETY
INSTRUCTIONS
WARNING!
When using electric tools,
basic safety precautions, Including the
following, should always be followed to reduce
the risk of fire, electric shock and personal
injury.
READ ALL THESE INSTRUCTIONS BEFORE
OPERATING THIS PRODUCT AND SAVE
THESE INSTRUCTIONS.
1. KEEP YOUR WORK AREA CLEAN
Cluttered areas and benches invite
injuries.
2. CONSIDER WORK AREA
ENVIRONMENT
Do not expose power tools to rain. Do not
use power tools in damp or wet locations.
Keep work area well lit. Do not use power
tools where there is risk to cause fire or
explosion.
3. GUARD AGAINST ELECTRIC SHOCK
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators, other metal surface).
4. KEEP CHILDREN AWAY
Do not let visitors touch the tool or
extension cord. All visitors should be kept
away from the area.
5. STORE IDLE TOOLS
When not in use, tools should be stored in
a dry, high or locked up place, out of reach
of children.
6. DO NOT FORCE THE TOOL
It will do the job better and safer at the rate
for which it was intended.
7. USE THE RIGHT TOOL
Do not force small tools or attachments
to do the job of a heavy-duty tool. Do not
use tools for purposes not intended, for
example, do not use circular saws to cut
tree limbs or logs.
8. DRESS PROPERLY
Do not wear loose clothing or jewellery;
they can be caught in moving parts.
Rubber gloves and non-skid footwear are
recommended when working outdoors.
Wear protecting hair covering to contain
long hair.
9. USE SAFETY GLASSES
Also use face mask or dust mask if the
cutting operation is dusty.
10. CONNECT DUST EXTRACTION
EQUIPMENT
If devices are provided for the connection
of dust extraction and collection facilities
ensure these are connected and properly
used.
11. DO NOT ABUSE THE CORD
Never carry the tool by the cord or yank
it to disconnect from the socket. Keep the
cord away from heat, oil and sharp edges.
12. SECURE WORK
Use clamps or a vice to hold the work-
piece. It is safer than using your hand and
it frees both hands to operate the tool.
13. DO NOT OVERREACH
Keep proper footing and balance at all
times.
14. MAINTAIN TOOLS WITH CARE
Keep cutting tools sharp and clean for
better and safer performance. Follow
instructions for lubrication and changing
accessories. Inspect tool cord periodically
and if damaged have it repaired by
an authorized service facility. Inspect
extension cords periodically and replace if
damaged. Keep handles dry, clean and free
from oil and grease.
15. DISCONNECT TOOLS
When not in use, before servicing and
when changing accessories such as blades,
bits and cutters, remove the mains plug
from the socket.
16. REMOVE ADJUSTING KEYS AND
WRENCHES
Make a habit of checking to see that keys
and adjusting wrenches are removed from
the tool before turning it on.
17. AVOID ACCIDENTAL STARTING
Do not carry a plugged-in tool with a finger
on the switch. Ensure switch is off before
plugging in.
09 08
RU-WU701 WU701.1 WU705 WU705.1 WU724 WU724.1-M-060726.indd 8 2006-7-26 14:13:36