Worx WU533 Скачать руководство пользователя страница 12

12

EN

1.  Always wear a dust mask.

SAFETY WARNINGS FOR 

BATTERY PACK

a)  Do not dismantle, open or shred cells or 

battery pack. 

b)  Do not short-circuit a battery pack. Do not 

store battery packs haphazardly in a box or 

drawer where they may short-circuit each 

other or be short-circuited by conductive 

materials.

When battery pack is not in use, keep 

it away from other metal objects, like paper 

clips, coins, keys, nails, screws or other small 

metal objects, that can make a connection from 

one terminal to another. Shorting the battery 

terminals together may cause burns or a fire.

c)  Do not expose battery pack to heat or fire. 

Avoid storage in direct sunlight.

d)  Do not subject battery pack to mechanical 

shock.

e)  In the event of battery leaking, do not 

allow the liquid to come into contact 

with the skin or eyes. If contact has been 

made, wash the affected area with copious 

amounts of water and seek medical advice.

f)  Seek medical advice immediately if a cell 

or battery pack has been swallowed.

g)  Keep battery pack clean and dry.

h)  Wipe the battery pack terminals with a 

clean dry cloth if they become dirty.

i)  Battery pack needs to be charged before 

use. Always refer to this instruction and 

use the correct charging procedure.

j)  Do not maintain battery pack on charge 

when not in use.

k)  After extended periods of storage, it may 

be necessary to charge and discharge 

the battery pack several times to obtain 

maximum performance.

l)  Battery pack gives its best performance 

when it is operated at normal room 

temperature (20 °C ± 5 °C).

m)  When disposing of battery packs, keep 

battery packs of different electrochemical 

systems separate from each other.

n)  Recharge only with the charger specified 

by Worx. Do not use any charger other 

than that specifically provided for use with 

the equipment. 

A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack. 

o)  Do not use any battery pack which is not 

designed for use with the equipment.

p)  Keep battery pack out of the reach of 

children.

q)  Retain the original product literature for 

future reference.

r)  Remove the battery from the equipment 

when not in use.

s)  Dispose of properly.

t)  Do not mix cells of different manufacture, 

capacity, size or type within a device.

u)  Do not remove battery pack from its 

original packaging until required for use.

v)  Observe the plus (+) and minus (–) marks 

on the battery and ensure correct use.

SYMBOLS

To reduce the risk of injury, user 

must read instruction manual

Warning

Wear ear protection

Wear eye protection

Wear dust mask

Batteries may enter water 

cycle if disposed improperly, 

which can be hazardous for 

ecosystem. Do not dispose of 

waste batteries as unsorted 

municipal waste.

Do not burn

Make sure the battery is 

removed prior to changing 

accessories.

Wear protective gloves

TCT blade

Wood

Содержание WU533

























Отзывы: