![Worx WU286 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/worx/wu286/wu286_original-instructions-manual_998565008.webp)
8
Problem solution
REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES
Charging time problems, as above, and having not used a battery
pack for a prolonged storage will reduce the battery pack working
time. This can be corrected after several charge and discharge
operations by charging & working with your tool. Do not re-charge
your battery pack below 0
o
C and above 45
o
C as this will affect
performance.
Maintenance
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
COLLET LOCKING SLEEVE
Pull the collet locking sleeve forward. Fully insert the desired bit into
the chuck and release the collet locking sleeve. The collet accepts
only standard 1/4” hexagonal shank accessories with power groove.
Do not use this tool as a drill. Tools equipped with shutoff clutches
are not designed for drilling applications. The clutch can shut off
automatically and without warning. Attempting to restart drilling after
shut-off has been reached can cause the tool to twist out of your
hand until the clutch again reaches shut-off. Do not attempt to insert
quick change type drill bits into this chuck.
REMOVING A BIT HOLDER, SOCKET OR SCREWDRIVER BIT
Pull the collet locking sleeve forward. Take the tool out of the chuck
and release the collet locking sleeve (See B).
FORWARD, REVERSE ROTATION AND LOCK CONTROL
Your tool is equipped with a forward, reverse rotation and lock control
located above the on/off switch. It was designed for changing rotation
of the chuck and for locking the on/off switch in the center position to
help prevent accidental start and accidental battery discharge.
For forward rotation, (with chuck pointed away from you) move the
lever to the far left. For reverse rotation move the lever to the far right.
To activate switch lock move the lever to the center off position.
Caution: Do not change direction of rotation until the tool
comes to a complete stop.
Shifting during rotation of the chuck can
cause damage to the tool.
USING THE SIGHT LIGHT
The sight light allows you to keep a clear view under less illuminated
circumstances. To turn on the light simply press the on/off switch.
When you release the on/off switch, the light will be off. (See B)
1
2
3
4
Содержание WU286
