background image

Programming guide

Control Panel and menu

Programming

After you have successfully installed the Landroid

®

M, it is now ready to be programmed according to your schedule. To program your Landroid

®

M, simply 

follow the step by step guide below.

Menu overview

RETURN

Back to proceeding menu

HOMEPAGE

Displays the state of your setting

Select up

Select down

OK

 

Confirms any setting.

Note: 

Make sure you 

confirm your selection 

within 30 secs or the 

display will return to 

previous menu. 

POWER ON/OFF

Turns the Landroid

®

M on and off

NUMBER PAD

Input numbers to set 

time, date

HOME

Sends the Landroid

®

M to its 

charging base during operation 

and activates charging

START

Shortcut key to start mowing.

STOP

To stop the Landroid

®

M during 

normal operation and charging. 

EN

HOMEPAGE

Language

Time Format

Date Format

Set Date & Time

Rain Start Delay

 

Auto Work Time

Customize Work Time

Customize Work Area

Enable boundary cut

 

Change PIN Code

Alarm Level

General Setting 

  

Working Time 

 

Security   

Start

To quick start your Landroid

®

M, first press 

 until the Landroid

®

M turns on and input the default PIN 0000, then press 

.

 is the shortcut button to command your Landroid

®

M to start mowing. Press 

 and close the cover to keep working and press 

 and close the cover to make 

Landroid

®

M go back for charging and mow the grass near boundary wire at the same time.  The Landroid

®

M will work continuously until it’s out of battery and then it will 

return to the charging base. Once charging is complete, the Landroid

®

M will automatically resume mowing or if it has finished mowing it will stay in the charging base. 

The factory default setting is 800m

2

 – refer to the Auto Mowing Time Schedule. if the time is not in the schedule, press START and close cover to start.

If you want to change the working time and other settings, please follow the steps below.

Setting

Press 

OK

 to enter the submenu. Use the 

 keys to select  General setting, Working time or Security. Then press 

OK

.

1.  General setting ( 

 )

Always close the panel cover after 
programming, your Landroid

®

 M 

will not move with it open.

WG790E

Отзывы: