Worx WG753, Руководство пользователя

Страница: 13 / 16

13
Cordless Lawn Mower EN
ASSEMBLY & OPERATION
NOTE: Read instruction handbook before operation this
machine.
INTENDED USE
This product is intended for domestic lawn mowing
ASSEMBLY & OPERATION
ACTION FIGURE
ASSEMBLY
Assembling the handle bar & Adjusting
Handle’s height
NOTE: Press and hold Quick-release
button during operation.
See Fig. A1, A2
Assembling the grass collection bag See Fig. B
Assembling the grass collection bag to
the lawn mower
NOTE: Depress the grass collection bag
slightly to ensure that it is com-pletely
installed.
NOTE: Push the mulching-bag switch
lever to open the mulching outlet before
fitting the grass collection bag.
See Fig. C1,
C2, C3
Removing/emptying grass collection bag
WARNING! Always check the
safety flap close the discharge
outlet before using. Never lift the safety
flap when the lawn mower is being used
without fitted grass collection bag.
See Fig. D1, D2
Assembling the side-discharge chute
Lift the mulching door to assemble the
side-discharge chute.
Note: Remember to remove the grass
collection bag firstly and then push the
mulching-bag switch lever to close the
mulching outlet before assembly.
See Fig. E1, E2
Removing /fitting the battery pack
NOTE: This machine will only run
when sp - batteries are installed. It is
recommended to use the same AH
batteries and charge the two batteries at
the same time.
When you use two batteries with different
AH, the machine will only run to the lower
common denominator.
See Fig. F1,F2
Checking the battery charge condition
NOTE: Fig.G1 only applies for the battery
pack with battery indicator light.
See Fig. G1
Charging the battery pack
NOTE: The batteries are shipped
uncharged. Each battery must be fully
charged before the first mow.
Always fully charge the two batteries at
same time. More details can be found in
charger’s manual.
See Fig.G2
OPERATION
Power indicator light
See details in BATTERY STATUS part
IMPORTANT:
When only one light is illuminated,
your battery is overly discharged,
even though the machine may still
be capable to work. Continuing
to operate your machine with the
battery in this discharged condi-tion
may reduce the life and performance
of your battery.
When no light is illuminated, at least
one battery is not fully installed or
battery may be defective, please
double check the batteries are fully
seated into position
.
See Fig. H
Starting and Stopping See Fig.I1,I2
Operating the self-propel system. See Fig.J
Adjusting the cutting height
WARNING!
Stop, release Operating
Bail and wait until the motor stops
before adjusting height. The blades
continue to rotate after the machine is
switched off, a rotating blade can cause
injury. Do not touch rotating blades.
See Fig.K
LED headlight See Fig. L
Storage
See Fig. M1,M2
BATTERY STATUS (See Fig. H)
• Before starting or after use, press the button beside the
power indicator light on the machine to check the battery
capacity.
• During operation, the battery capacity will be indicated
automatically by the battery power indicator. The
indicator constantly senses and displays the battery
condition as follows.
• Charge the machine with 2 battery packs with different
AH, the power indicator light displays the battery
condition with the lower one of the two batteries.
Battery power
indicator status
Battery condition
Five green lights
( ) are
illuminated.
The two batteries are in a highly
charged condition.